DTX Glycol HybridsHigh CoP, Non-Toxic & Food Safe

2001: Toxicon laboratories verify the process and efficacy of detoxifing Ethylene Glycol, through neutralisation of the Alcohol Dehydrogenase (ADH) enzyme. I.E. All Ethylene Glycol based formulations can now be rendered non-toxic through the Detoxification (DTX) process.

2010: Coolflow DTX range launched and patent granted in 2013.

2016: HSE review and validate all data collated within the DTX Dossier.

For all operators previously or currently using Propylene Glycol based solutions, DTX technology represents a major improvement in the Coefficient of Performance (CoP). The list of Blue Chip users taking advantage of DTX technology is extensive and continues to grow.

DTX Glycol Hybrid based products

Coolflow DTX Coolflow DTX

A ABAAA

High Efficiency Non Toxic Antifreeze and Secondary Refrigerant for process cooling & AC systems. Based on Ethylene Glycol blended with patented DeTox™ additive and ASTM D1384 proven Corrosion, Scale and Biological Inhibitors.

Show more...

  • Summary - Rating: ASuitable for food & beverage process cooling and other applications where a non-toxic classification is preferred. High efficiency and more cost effective than MPG based coolants.

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and reduced energy demands.

  • Antifreeze - Rating: AProvides protection down to -50°C and lower concentration (% volume) is required to achieve the same freeze-point protection, when compared with NTP, USP, ECO2 and ECO3.

  • Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for food & beverage processing systems and where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.

  • Density:1.04 - 1.15 g/cm³ depending on inhibitors

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma

  • Available in: 5, 10, 15, 20, 25, 205 & 1000 litre containers and bulk tankers.

Frost Protection °C

v/v of Coolflow DTX %

Refractive Index

-10

22.0

1.356

-15

28.0

1.362

-20

33.0

1.367

-25

38.0

1.372

-30

42.0

1.376

-35

46.0

1.380

Request

Show less

Thermox DTX Thermox DTX

A ABAAA

High efficiency non-toxic heat transfer fluid with antifreeze function, for use in geothermal, GSHP & air source heat recovery systems. Based on ethylene glycol blended with patented DeTox™ additive and ASTM D1384 proven corrosion, scale and biological inhibitors.

Show more...

  • Summary - Rating: ASuitable for geothermal, GSHP and air-source heat recovery systems and other heating applications where a non-toxic classification is preferred. High efficiency and more cost effective than MPG and bio-based coolants.

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

  • Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with FPG and FXC2.

  • Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.

  • Density:1.04 - 1.15 g/cm³

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 15, 20, 25, 205 & 1000 litre containers and bulk tankers.

Frost Protection °C

v/v of Thermox DTX %

Refractive Index

-10

22.0

1.356

-15

28.0

1.362

-20

33.0

1.367

-25

38.0

1.372

-30

42.0

1.376

-35

46.0

1.380

Request

Show less

Solaris DTX Solaris DTX

A ABAAA

High Efficiency, Non Toxic, Extreme Temperature Rated Heat Transfer Fluid with Antifreeze. Based on Ethylene Glycol blended with patented DeTox™ additive and Reversibly Evaporable Inhibitors for use in Solar Thermal Heating Systems.

Show more...

  • Summary - Rating: ASuitable for solar heat recovery systems using evacuated tube, flat-plate and thermodynamic solar-panels, where a non-toxic classification is preferred. More efficient and more durable than MPG based fluids.

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

  • Antifreeze - Rating: ACapable of providing freeze protection down to -50°C, subject to volume (concentration) used. Less volume is required to achieve the same freeze-point protection, when compared with MPG based fluids.

  • Corrosion Control - Rating: AAll Solaris heat transfer fluids are formulated with extreme temperature rated reversibly-evaporisable inhibitors, which are suitable for evacuated tube, flat plate and thermodynamic solar panels.

  • Toxicity - Rating: AClassified as Non-Toxic. Suitable for systems where low-toxicity is stipulated or preferred.

  • Density:1.02 - 1.15 g/cm³ depending on inhibitors

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 15, 20, 25, 205 & 1000 litre containers and bulk tankers.

Frost Protection °C

v/v of Solaris DTX %

Refractive Index

-20

35.0

1.371

-25

40.0

1.376

-30

45.0

1.381

Request

Show less

Solaris DTX20 Solaris DTX20

A ABAAA

Ready-To-Use, High Efficiency, Non Toxic, Extreme Temperature Rated Heat Transfer Fluid with Antifreeze. Based on Ethylene Glycol blended with patented DeTox™ additive and Reversibly Evaporable Inhibitors to prevent corrosion, scaling and biological fouling.

Show more...

  • Summary - Rating: ASuitable for solar heat recovery systems using evacuated tube, flat-plate and thermodynamic solar-panels, where a non-toxic classification is preferred. More efficient and more durable than MPG based fluids.

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

  • Antifreeze - Rating: ASolaris DTX20 is a ready-to-use heat transfer fluid, premixed to provide freeze protection down to -20°C.

  • Corrosion Control - Rating: AAll Solaris heat transfer fluids are formulated with extreme temperature rated reversibly-evaporisable inhibitors, which are suitable for evacuated tube, flat plate and thermodynamic solar panels.

  • Toxicity - Rating: AClassified as Non-Toxic. Suitable for systems where low-toxicity is stipulated or preferred.

  • Density:1.02 - 1.15 g/cm³ depending on inhibitors

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 15, 20, 25, 205 & 1000 litre containers and bulk tankers.

Frost Protection °C

v/v of Solaris DTX20 %

Refractive Index

Request

Show less

BioTherm DTX BioTherm DTX

A ABAaa

High Efficiency Non Toxic Heat Transfer Fluid with Antifreeze. Based on Ethylene Glycol blended with patented DeTox™ additive and ASTM D1384 High Temperature Rated Inhibitors for use in Biomass Heating Systems.

Show more...

  • Summary - Rating: ASuitable for biomass boiler heating systems and other heating applications where a non-toxic classification is preferred. High efficiency and more cost effective than MPG and bio-based coolants.

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

  • Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with MPG based fluids.

  • Corrosion Control - Rating: aLong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: aClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated or preferred.

  • Density:1.11 g/cm³

  • pH:8.0 - 8.5

  • Boiling Point:>100°C

  • Characteristics:a clear, straw coloured, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 15, 20, 25, 205 & 1000 litre containers and bulk tankers.

Frost Protection °C

v/v of BioTherm DTX %

Refractive Index

-10

22.0

1.356

-15

28.0

1.362

-20

33.0

1.367

-25

38.0

1.372

-30

42.0

1.376

-35

46.0

1.380

Request

Show less

Thermaflow DTX Thermaflow DTX

A ABAAA

High Efficiency Non Toxic Heat Transfer Fluid with Antifreeze. Based on Ethylene Glycol blended with patented DeTox™ additive with ASTM D1384 High Temperature Rated Corrosion Inhibitors for use in Hot Water Heating Systems.

Show more...

  • Summary - Rating: ASuitable for central heating & LTHW systems and other heating applications where a non-toxic classification is preferred. High efficiency and more cost effective than MPG and much less toxic than MEG.

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

  • Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with MPG based fluids.

  • Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated or preferred.

  • Density:1.04 - 1.15 g/cm3

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 15, 20, 25, 205 & 1000 litre containers and bulk tankers.

Frost Protection °C

v/v of Thermaflow DTX %

Refractive Index

-10

22.0

1.356

-15

28.0

1.362

-20

33.0

1.367

-25

38.0

1.372

-30

42.0

1.376

-35

46.0

1.380

Request

Show less

Product Selector

The Right Fluid for Your Application

Hydratech have the experience and expertise to provide you with the fluid that meets all the requirements for your systems

Select your sector
  • Agriculture
  • Energy & Renewables
  • Building Services
  • Food & Drink
  • Manufacturing

Technical Support

Talk Direct, Buy Direct

Your single source for specialist technical advice and factory direct pricing

t. 01792 586800
Contact Us