Regular analysis can extend the life of both fluid and system. Hydratech’s Fluid Monitoring Program (FMP) is a very straight forward, effective way to proactively monitor closed-loop system condition.
Performance Rating
Summary - Rating: ASuitable for biomass boiler heating systems and other heating applications where a non-toxic classification is preferred. High efficiency and more cost effective than MPG and bio-based coolants.
Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.
Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with MPG based fluids.
Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.
Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated or preferred.
Physical Properties
Density:1.11 g/cm³
pH:7.5 - 9.0 depending on inhibitors
Boiling Point:>100°C
Characteristics:Clear, straw coloured, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.
Available in: 5, 10, 20, 25, 205 & 1000 litre containers and bulk tankers
Mixing Guide
Frost Protection °C
v/v of Biotherm DTX™ %
Refractive Index
-10
22.0
1.35600
-15
28.0
1.36200
-20
33.0
1.36700
-25
38.0
1.37200
-30
42.0
1.37600
-35
46.0
1.38000
