Regular analysis can extend the life of both fluid and system. Hydratech’s Fluid Monitoring Program (FMP) is a very straight forward, effective way to proactively monitor closed-loop system condition.
Performance Rating
Summary - Rating: BSuitable for geothermal, GSHP and air-source heat recovery systems and other heating applications where a toxic classification is not an issue. High efficiency and more cost effective than FPG and FXC2
Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.
Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with FPG and FXC2.
Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.
Toxicity - Rating: DClassified as Harmful but usually considered as Toxic. Suitable for industrial cooling systems where toxicity is not an issue.
Physical Properties
Density:1.09 - 1.14g/cm³ depending on inhibitors
pH:7.5 - 9.0 depending on inhibitors
Boiling Point:>100°C
Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.
Available in: 5, 10, 20, 25, 205 & 1000 litre containers and bulk tankers
Mixing Guide
Frost Protection °C
v/v of Thermox ITF %
Refractive Index
-10
20.0
1.35190
-15
27.0
1.35860
-20
32.0
1.36350
-25
37.0
1.36830
-30
41.0
1.37210
-35
45.0
1.37600
