ThermoxGeothermal, GSHP & ASHP Fluids

Summary - Rating: ASuitable for geothermal, GSHP and air-source heat recovery systems and other heating applications where a non-toxic classification is preferred. High efficiency and more cost effective than MPG and bio-based coolants.

Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with FPG and FXC2.

Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.

Summary - Rating: BSuitable for geothermal, GSHP and air-source systems where low toxicity is preferred. Average efficiency but higher cost compared with ECO based fluids.

Efficiency - Rating: CAverage thermal conductivity and higher viscosity at sub-zero temperatures, results in reduced heat transfer efficiency and increased energy demands, compared with DTX. Good Specific Heat capacity helps improve overall performance.

Antifreeze - Rating: BProvides protection down to -50°C but greater concentration (% volume) is required to achieve the same freeze-point protection, compared with DTX and ITF.

Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.

Summary - Rating: BSuitable for geothermal, GSHP and air-source heat recovery systems and other heating applications where a toxic classification is not an issue. High efficiency and more cost effective than FPG and FXC2

Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with FPG and FXC2.

Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

Toxicity - Rating: DClassified as Harmful but usually considered as Toxic. Suitable for industrial cooling systems where toxicity is not an issue.

Summary - Rating: BSuitable for geothermal, GSHP and air-source systems where low environmental impact and ecological sustainability is preferred. Average efficiency but lower in cost compared with MPG based fluids.

Efficiency - Rating: CAverage thermal conductivity and high viscosity at sub-zero temperatures, results in lower heat transfer efficiency and increased energy demands when compared with DTX and ITF.

Antifreeze - Rating: BProvides protection down to -50°C but more volume is required to achieve the same freeze-point protection compared with DTX and ITF.

Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.