Thermaflow Process Heating Fluids

Summary - Rating: ASuitable for central heating & LTHW systems and other heating applications where a non-toxic classification is preferred. High efficiency and more cost effective than MPG and much less toxic than MEG.

Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with MPG based fluids.

Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated or preferred.

Summary - Rating: BSuitable for central heating & LTHW systems and other heating applications where a toxic classification is not an issue. High efficiency and more cost effective than Thermaflow VT3 and TPF

Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with Thermaflow VT3 and TPF.

Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

Toxicity - Rating: DClassified as Harmful but usually considered as Toxic. Suitable for industrial cooling systems where toxicity is not an issue.

Summary - Rating: BSuitable for central heating & LTHW systems where low toxicity is preferred. Average efficiency but higher cost compared with Thermaflow VT3 fluid.

Efficiency - Rating: CAverage thermal conductivity and higher viscosity at sub-zero temperatures, results in reduced heat transfer efficiency and increased energy demands, compared with Thermaflow DTX. Good Specific Heat capacity helps improve overall performance.

Antifreeze - Rating: BProvides protection down to -50°C but greater concentration (% volume) is required to achieve the same freeze-point protection, compared with Thermaflow DTX and CMF.

Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.

Summary - Rating: BSuitable for central heating and LTHW systems where low environmental impact and ecological sustainability is preferred. Average efficiency but lower in cost compared with MPG based fluids.

Efficiency - Rating: CAverage thermal conductivity and high viscosity at sub-zero temperatures, results in lower heat transfer efficiency and increased energy demands when compared with Thermaflow DTX and CMF.

Antifreeze - Rating: BProvides protection down to -50°C but more volume is required to achieve the same freeze-point protection compared with Thermaflow DTX and CMF.

Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.