Biotherm Biotherm Heat Transfer Fluids for Biomass Systems

A range of fully inhibited heat transfer fluids, with antifreeze function, for Biomass Boiler systems. Biotherm solutions are installed in Biomass Boiler systems of all sizes throughout the UK.

To prevent internal corrosion, scaling and biological fouling all Biotherm products are formulated with long-life inhibitors which exceed ASTM D1384 standards.

biotherm drums
biotherm drums

Hydratech Recommends

Biotherm DTX Biotherm DTX

A ABAAA

High Efficiency Non Toxic Heat Transfer Fluid with Antifreeze. Based on Ethylene Glycol blended with patented DeTox™ additive and ASTM D1384 High Temperature Rated Inhibitors for use in Biomass Heating Systems.

Show more...

  • Summary - Rating: ASuitable for biomass boiler heating systems and other heating applications where a non-toxic classification is preferred. High efficiency and more cost effective than MPG and bio-based coolants.

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

  • Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with MPG based fluids.

  • Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated or preferred.

  • Density:1.11 g/cm³

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, straw coloured, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 15, 20, 25, 205 & 1000 litre containers and bulk tankers.

Frost Protection °C

v/v of Biotherm DTX %

Refractive Index

-10

22.0

1.356

-15

28.0

1.362

-20

33.0

1.367

-25

38.0

1.372

-30

42.0

1.376

-35

46.0

1.380

Request

Show less

Other Suitable products

Biotherm BP8 Biotherm BP8

B BCBAA

Non Toxic Heat Transfer Fluid with Antifreeze Function. Based on Propylene Glycol and ASTM D1384 High Temperature Corrosion Inhibitors for Biomass Heating Systems.

Show more...

  • Summary - Rating: BSuitable for biomass boiler heating systems where low toxicity is preferred. Average efficiency but higher cost compared with Biotherm VB4 fluid.

  • Efficiency - Rating: CAverage thermal conductivity and higher viscosity at sub-zero temperatures, results in reduced heat transfer efficiency and increased energy demands, compared with Biotherm DTX. Good Specific Heat capacity helps improve overall performance.

  • Antifreeze - Rating: BProvides protection down to -50°C but greater concentration (% volume) is required to achieve the same freeze-point protection, compared with Biotherm DTX and BE2.

  • Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.

  • Density:1.02 - 1.15 g/cm³ depending on inhibitors

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 15, 20, 25, 205 & 1000 litre containers and bulk tankers.

Frost Protection °C

v/v of Biotherm BP8 %

Refractive Index

-10

25.0

1.356

-15

33.0

1.364

-20

39.0

1.370

-25

44.0

1.373

-30

48.5

1.380

-35

52.5

1.383

Request

Show less

Biotherm BE2 Biotherm BE2

B BBAAD

Industrial Heat Transfer Fluid with Antifreeze. Based on Ethylene Glycol and ASTM D1384 High Temperature Rated Inhibitors for Biomass Heating Systems.

Show more...

  • Summary - Rating: BSuitable for biomass boiler heating systems and other heating applications where a toxic classification is not an issue. High efficiency and more cost effective than Biotherm BP8 and VB4

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

  • Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with Biotherm BP8 and VB4.

  • Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: DClassified as Harmful but usually considered as Toxic. Suitable for industrial heating systems where toxicity is not an issue.

  • Density:1.07 g/cm³

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 15, 20, 25, 205 & 1000 litre containers and bulk tankers.

Frost Protection °C

v/v of Biotherm BE2 %

Refractive Index

-10

20.0

1.349

-15

27.0

1.355

-20

32.0

1.359

-25

37.0

1.363

-30

41.0

1.366

-35

45.0

1.369

Request

Show less

Biotherm VB4 Biotherm VB4

B BCBAA

Ecologically and Environmentally Friendly Non Toxic Heat Transfer Fluid with Antifreeze. Based on Refined Vegetable Extracts and ASTM D1384 proven Corrosion, Scale and Biological Inhibitors, for use in Biomass Heating Systems.

Show more...

  • Summary - Rating: BSuitable for biomass boiler heating systems where low environmental impact and ecological sustainability is preferred. Average efficiency but lower in cost compared with MPG based fluids.

  • Efficiency - Rating: CAverage thermal conductivity and high viscosity at sub-zero temperatures, results in lower heat transfer efficiency and increased energy demands when compared with Biotherm DTX and BE2.

  • Antifreeze - Rating: BProvides protection down to -50°C but more volume is required to achieve the same freeze-point protection compared with Biotherm DTX and BE2.

  • Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.

  • Density:1.02 - 1.26 g/cm³

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, slightly viscous liquid. It is slightly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 15, 20, 25, 205 & 1000 litre containers and bulk tankers.

Frost Protection °C

v/v of Biotherm VB4 %

Refractive Index

-10

25.0

1.355

-15

32.0

1.362

-20

38.0

1.367

-25

43.0

1.372

-30

48.0

1.377

-35

52.0

1.380

Request

Show less

Technical Support

Talk Direct, Buy Direct

Your single source for specialist technical advice and factory direct pricing

t. 01792 586800
Contact Us

Technical Consultancy